Pump Head Assembly for standard height casings -- 12” or more above ground level. (With three connection options: 3/4” hose, NPT, and 90-degree spout.)

Pump Head Assembly. Double-height for lower casing - from 12” above to 12” below ground. (With three connection options: 3/4” hose, NPT, and 90-degree spout.)

Heavy Duty Pump Head Assembly. Standard-height casing.

Heavy Duty Pump Head Assembly. Double-height riser for lower casing.

Suction Pump Head with 125 Piston. (With three connection options: 3/4” hose, NPT, and 90-degree spout. output is 8.5 ounces per full stroke.)

Suction Pump Head with 125 Piston. Double-height for lower casing. (With three connection options: 3/4” hose, NPT, and 90-degree spout. output is 8.5 ounces per full stroke.)

24” Lever-arm pump handle. Includes unique graphite-impregnated bronze bushings at handle pivot points.

Heavy Duty 24" Lever-arm assembly with ball-bearings for heavy use.

36” Lever-arm pump handle. Includes unique graphite-impregnated bronze bushings at handle pivot points. Cuts pumping effort in half, for deeper water levels.

Heavy Duty 36" Lever-arm assembly with ball-bearings for heavy use.

12v DC, 60 rpm, 1/5hp Motor with Linear Bearing Link drive. Includes 13” SS pump rod extension and first motor brush replacements.

24v DC, 60 rpm, 1/4hp Motor with Linear Bearing Link drive. Includes 13” SS pump rod extension and first motor brush replacements.

12v DC, 60 rpm, 1/5hp Motor with Linear Bearing Link drive. Includes 13” SS pump rod extension and first motor brush replacements with weather-resistant enclosure.

24v DC, 60 rpm, 1/4hp Motor with Linear Bearing Link drive. Includes 13” SS pump rod extension and first motor brush replacements with weather-resistant enclosure.

Solar Power kit includes the combination of LBLD24-4S-2-Assy (Battery Backup - Drive Only) and PS2-Double Module Package (Battery Backup - Panels)

Solar Power Battery Backup - Drive Only

Solar Power Battery Backup – Panels

Simple Pump’s own 2” well cap. One port with a 1-3/4" split-flange for the Simple Pump. CNC machined from solid billet of metal.

Simple Pump’s own 3” well cap. One port with a 1-3/4" split-flange for the Simple Pump. CNC machined from solid billet of metal.

Simple Pump’s own 4" well cap. Three ports: a 1-3/4" split-flange for the Simple Pump, a 1" FNTP with threaded PVC plug for AC supply, a 1.7" smooth-wall port with slight taper and press-fit plug for the submersible discharge. CNC machined from solid billet of metal.

Simple Pump’s own 4.5" well cap. Three ports: a 1-3/4" split-flange for the Simple Pump, a 1" FNTP with threaded PVC plug for AC supply, a 1.7" smooth-wall port with slight taper and press-fit plug for the submersible discharge. CNC machined from solid billet of metal.

Simple Pump’s own 5” well cap. Four ports: a 1-3/4" split-flange for the Simple Pump, a 1" FNTP with threaded PVC plug for AC supply, a 1.7" smooth-wall port with slight taper and press-fit plug for the submersible discharge and a 3/4” FNTP with threaded PVC plug for vent or shocking. CNC machined from solid billet of metal.

Simple Pump’s own cap for 6” and 6.25" casings. Four ports: 1-3/4" for the Simple Pump with split flange, 1.7" smooth-walled port with slight taper having a press-fit plug for submersible, (2)-1" FNPT with threaded PVC plugs, one for wiring, one for shock. CNC machined from solid billet of metal.

Simple Pump’s own well cap for 6” and 6.25" casings. Used when submersible exit is through well cap and there is a 4” liner. Hole spacing is identical to the 4” cap. CNC machined from solid billet of metal.

Simple Pump’s own 6" well cap with 5.5” ID inner groove. Four ports: a 1-3/4" split-flange for the Simple Pump, a 1" FNTP with threaded PVC plug for AC supply, a 1.7" smooth-wall port with slight taper and press-fit plug for the submersible discharge and a 3/4” FNTP with threaded PVC plug for vent, shocking or Well Watch monitor. CNC machined from solid billet of metal.

C6-6.25 well cap assembly for use on 6" casing and 6.25" DR27.6 casing. Split flange port for the Simple Pump, 2.375" auxiliary port,1" FNPT electrical port and 1" FNPT shock port. Includes (4)-5/16-18x1 SSCPSS.

Simple Pump’s own 8” well cap. Four ports: a 1-3/4" split-flange for the Simple Pump, a 1" FNTP with threaded PVC plug for AC supply, a 1.7" smooth-wall port with slight taper and press-fit plug for the submersible discharge and a 3/4” FNTP with threaded PVC plug for vent, shocking or Well Watch monitor. CNC machined from solid billet of metal.

Our own 5" well cap (5-5/8" OD casings). For use with submersible pitless adaptor configuration. One port with a 1-3/4" split-flange for the Simple Pump. Certified, gasketed, one 1" FNPT port for vent or submersible wiring, one 3/4" FNPT port for vent or submersible wiring.

6" Boshart cast iron well cap (for 6” or 6.25” ID casing with 6-5/8" OD). For use with submersible pitless adaptor configuration. One port with a 1-3/4" split-flange for the Simple Pump. Certified, gasketed, (2)-3/4" screened vents, 1" FNPT conduit connection in bump-out. Extra port for vent, shocking or Well Watch monitor.

6.25" Boshart cast iron well cap (6.9"-7" OD casing). For use with submersible pitless adaptor configuration. One port with a 1-3/4" split-flange for the Simple Pump. Certified, gasketed, (2)-3/4" screened vents, 1" FNPT conduit connection in bump-out. Extra port for vent, shocking or Well Watch monitor.

105" drop pipe kit: 1" PVC top drop pipe (NPT), stainless steel coupler, lift rod with stainless steel (304SS) threaded rod ends, rod guide. 1/16" weep hole at 48”, 60", 72", 84", or 96" for freeze-proofing.

54” top drop pipe kit: 1" PVC top drop pipe (NPT), stainless steel coupler, lift rod with stainless steel (304SS) threaded rod ends, and rod guide. 1/16" weep hole at 48” for freeze-proofing.

105" drop pipe kit: 1" PVC drop pipe (NPT), stainless steel coupler, lift rod with stainless steel (304SS) threaded rod ends, rod guide.

54” drop pipe kit: 1" PVC drop pipe (NPT), stainless steel coupler, lift rod with stainless steel (304SS) threaded rod ends, rod guide.

27” drop pipe kit: 1" PVC drop pipe (NPT), stainless steel coupler, lift rod with stainless steel (304SS) threaded rod ends, rod guide.

Pump Cylinder Assembly, with triple seals. (output is up to 4.5 ounces per full stroke)

Pump Cylinder Assembly, with four seals. (output is up to 8.5 ounces per full stroke)

Pump Cylinder Assembly, with four seals. (output is up to 20 ounces per full stroke)

Seal kit: for first maintenance: (2) buna u-cup seals and (2) urethane u-cup seals for the piston body, (2) buna u-cup seals for the rod gland in the pump head.

Seal kit: for first maintenance: (2) buna u-cup seals and (2) urethane u-cup seals for the piston body, (2) buna u-cup seals for the rod gland in the pump head.

Seal kit for Model 125 (2 urethane for piston, 2 buna for rod gland).

Seal kit: for first maintenance: (2) buna u-cup seals and (2) urethane u-cup seals for the piston body, (2) buna u-cup seals for the rod gland in the pump head.

Split Flange, (3)-5/16-18x1-1/4 SS SHCS, (1)-5/16-18x1" SS SHCS, 224 o-ring Used to mount the Simple Pump to an existing well cap or SIM082 mounting plate.

Mounting Plate with split flange: 7" x 9" x 1/2" T6061 AL mounting plate, four mounting bolts with lock washers nuts and split flange kit with 224 o-ring.

Pedestal Adaptor: to install a Simple Pump on the concrete, metal or wood cover of a hand-dug well. Used when a submersible pipe must also be accommodated.

6” SDR26 PVC well casing, 5’ in length. To reinforce casing.

Spare Parts Kit

Spare Parts Kit - Heavy Duty Handle Configuration

Pitless Adaptor assembly, for pumping to underground pipe. Includes all necessary components to use with the Simple Pump. Your local professional will need to supply a check valve for plumbing to your existing submersible line.
* This quote presumes the pitless will be between 4 and 7 feet from the rim of the casing. If it is less or more it will require additional parts.

Installation Safety Tool. Machined from solid billet of metal. To hold each drop pipe in turn. Required for DIY installation.

T-Handle Installation Assist Tool. Screws into end of pipe, to help with weight of 8 or more drop pipe units.

Heavy Duty T-Handle Assembly Tool. Galvanized steel, designed for systems with 16 or more drop pipe kits.

One-way check valve, with pressure gauge. For pumping into your home’s plumbing (pressure tank) or uphill. Includes port to let air in, allowing water to drip out of pump head through the weep hole, preventing freezing.

Faux casing for display units. Section of casing cutaway to see pump cylinder, with four folding aluminum legs.

Pressure switch. Turn on at 20psi, off at 40psi. (or if better for your system, we also have the PS30-50)

Pressure switch. Turn on at 30psi, off at 50psi. (or if better for your system, we also have the PS20-40)