Request a Quote

Well Information

Please input the required information about your well.

Where is your well? *

Video Help

What is the depth of your well (in feet)? *

Video Help

This is the distance from the ground level to the solid bottom of the well. This is measured from the ground level down.

What is the static water level (in feet)? *

Video Help

The static water level is measured from the ground level down. This is the stable water level in your well when you have not recently been pumping water.

The static water level of your well cannot be equal to or larger than the depth of your well.

Is the static water level measurement estimated or did you measure it? *

Video Help

What is the recovery rate of the well? *

Video Help

What is the freezing level / frost line (in inches) at the well? *

Video Help

This is to ensure that your pump will not freeze. If you do not know, please contact your local utilities/authorities, well company, or builder.

What is the inside diameter of the casing? *

Video Help

What is the casing rise above ground level? *

Video Help

If you think it will be useful, please attach your well report or a picture of your well.

Pump Configuration

Please let us know if you are pumping into a pressure tank or are interested in a motor configuration.

Who will install the pump? *

Video Help

Is there a pump in the well now? *

Video Help

What size is the submersible pipe? *

Video Help

1 (~1.3" outer diameter), 1.25 (~1.65" outer diameter), 1.5 (~1.9" outer diameter), 2.0 (~2.4" outer diameter), Other (provide details below)

There are a couple types of pitless adapters that will not allow a hand pump to be installed. You will need to remove the cap in order to verify. One will not allow the well cap to be installed correctly and the other does not provide the necessary clearance. If you have either of the two types of pitless adapters shown, you will need to change to a different type of pitless adapter in order to install a hand pump. Make sure to verify this before ordering, once the system is shipped standard return policy applies.

pitless example 1pitless example 2

 

This is measured from the ground level down. This is where the current pump is set. This measurement is a larger number (further down) than the static water level measurement.

The position of the current pump cannot be larger than the depth of your well.

The static water level of your well cannot be equal to or larger than the current pump position.

Are you going to pump to a pressure tank? (now or future) *

Video Help

Most people pump into their home's pressure tank to have water available to the taps and fixtures.

Is there any vertical rise from the well head up to the point of delivery? *

Video Help

When you are standing at the well head (ground level), is the water going somewhere roughly to the same level? If the water is going up a slope, what is the vertical height of the destination above the well head? (in feet)

Are you interested in adding a motor? (now or future) *

Video Help

Your Information

Please input the required information about yourself.